What Are The Eight Steps In Car Leather Seat Modification?

- Sep 13, 2018 -

Among all car accessories, leather seats are the first choice for improving vehicle grades. The leather seat does not need to be cleaned with water. If it is dirty, it will be completely refreshed by wiping it with a cleaning agent. After wiping, let the seat dry immediately without damage to the cortex. So more and more owners have modified leather seats. Simply put, the leather seat production is divided into eight processes: dismantling, cutting, cutting, running, sewing, wrapping, repairing, and loading.

1.Disassembly

      The first step in a car with a leather seat is to safely remove the original seat on the car. This program does not require a lot of skill, but for some models need to pay attention to safety, to find out the position of the airbag, and then move as light as possible to avoid the impact of the airbag. Next, remove the flannel sleeve of the original seat to reveal the sponge inside the seat.

2. Board

After the original cover of the seat and seat is removed, the next thing to do is to make the board. The production of the board is the most critical step, which requires high technology. The technician will carry out detailed analysis and comparison according to the fleece cover of the original car, the shape of the seat and the shape of the seat sponge, and produce "plates" of different sizes step by step. This process is very complicated and time consuming. A set of leather seats consists of dozens of "boards". However, when the "board" was first formed, the same type of seat would not need to be "made". Most of the models in the interior custom shop have a plate type, so this step can be skipped.

3. Crop

“Cutting” is to cut the skin and cut a whole piece of leather according to the shape of the plate. This step needs to be completed by a certain technical and technical technician. The experienced technician knows the selection of the leather surface and the matching of the plate type, and also allows the leather to be used most reasonably.

4.Run in

After the leather is cut, add a layer of sponge on the inside of the skin (the inner side of the leather surface). The sponge should be smashed on the leather first, which is called “running film” in the industry.

Mercedes Viano modified car case.jpg

5. Stitching

The “stitch” is the stitching, stitching the prepared leather surface together in a fixed position. This is the most important technology in all programs. The first thing customers should pick is whether the leather chair line is straight and even. It is necessary to ensure that the exposed line of the leather chair is absolutely straight.

6. On the package

Put the leather of each part that has been stitched on the seat, and then fix it with the seat by means of staples, clips, steel bars, wire, and then tapping with the hand and making a preliminary preliminary work. . The leather seat is not wrinkled on the seat surface, and has a great relationship with the shape of the plate. Since the dermis is thick and hard, it is difficult to achieve a little wrinkle in a suitable plate shape, so the step of wrapping the bag will also assist in the completion of wrinkling.

Luxury VIP electric seat.jpg

7. Trimming

The wrapped leather seats are further refined and trimmed to complete the seat and perform the final finishing work.

8. In the last process, install the finished, almost perfect leather seats into the car according to the original distribution and installation method. Check whether there are any unfinished links in the final inspection.


  • Customized Two Three Four Seats Per Row
  • Auditorium Folding Seat Assembly Hall Leather Seat With Tablet
  • Garden Folding Fabric Cushion Lounge Beach Chair
  • Marine Aluminum Passenger Plastic Seat for Boat
  • Adjustable Auto Racing Simulator Seat with Recliner Slider Rail
  • Injection Molded Plastic Seat for Higer Yutong Kinglong City Public Bus

Related Products