Gas spring installation precautions?

Before the gas spring is installed, we must first solve a problem. It is very important to understand its installation precautions. Because only understand, you can install correctly and avoid errors, so let's focus on the following.

Gas spring installation precautions, summarized as follows, are:

(1) The piston rod in the gas spring should be installed as far as possible, which can ensure the good damping effect and cushioning performance of the gas spring.

(2) The gas spring fulcrum should be installed correctly, the position should be accurate, and there should be no deviation.

(3) When the gas spring works, it cannot be subjected to the tilting force or the lateral force.

(4) The surface of the piston rod should be protected and there should be no damage, so as not to affect its sealing performance. There must be no paint or chemicals on the surface.

(5) After the gas spring is installed, it can no longer be processed, so as not to affect its service life.

(6) The gas spring is strictly prohibited from being impacted, so as not to affect its use.

(7) When installing the gas spring, it should be carried out according to the specified requirements, and choose a reasonable size so that the gas spring has a suitable amount of expansion and contraction to avoid jamming and abnormal noise.