How do gas springs understand and how to answer professional questions?

For the gas spring, it is not unfamiliar to everyone, but if you look at the expected learning effect, so far, there are still many shortcomings and some missing points in the level of learning achieved in the past. Therefore, this means that its study work has to continue, and we can't relax and sloppy in our learning attitude. Otherwise, we can't have good learning results.

1. Gas spring, what is it from a professional point of view?

This problem, in the gas spring manufacturer Bonwell, is not difficult to answer, so the specific answer is:

A gas spring, which is a professional point of view, is a spring that can be lifted and lifted, or can be said to be an elastic element that uses gas as a working medium. Moreover, if necessary, this type of spring can also be equipped with a self-locking function to meet different needs.

2. The gas spring support rod does not shrink back. What is the main problem? And, under normal circumstances, will it happen that it cannot be reset quickly?

The gas spring support rod, if its shrinkage does not go back, then the main reason, according to gas spring manufacturer Bonwell, should be for the luminosity problem. As for the latter question, the answer is yes. Because, in general, the gas spring can be quickly reset. However, if the elasticity is too small, or if the weight is too heavy, then the above phenomenon will occur.

3.800mm long gas spring, how to determine the upper and lower limits of its supporting force? And, what kind of law is generally used in the gas spring test pressure process?

The 800mm long gas spring is determined by the upper and lower limits of the supporting force. Generally speaking, it is obtained by the size of the gas spring. As for the law used in gas spring testing pressure, gas spring manufacturer Bonwell believes that the main one is Hooke's law, and it is also the main one.