Marine bearing is a very important part of the ship, it is very important to ensure the safety and performance of the ship. Therefore, when installing Marine bearings, special attention should be paid to some problems. The following are the matters needing attention and steps for the installation of ship bearings.
I. Preparation
Before the installation of Marine bearings, the following preparations should be made:
1. Clean the bearing. Put the bearing into the axle bearing washer, clean it with cleaning fluid, and then dry it with a dust-free cloth.
2. Check the isolation pad. Check whether the isolation pad is intact and the cleanliness is up to standard.
3. Check the bearing housing. Check the bearing housing for damage or deformation.
4. Lubricate bearings. The bearings and seats are coated with appropriate lubricating oil to reduce oil film wear and reduce friction.
