Technical requirements for marine furniture
(1) The plate should have sufficient strength and flatness;
(2) Clarify the type of lining, ceiling, siding and floating floor, and require relevant ship inspection certificates;
(3) The materials used in the kitchen and pantry should be specially explained;
(4) Description of the fire rating of the board;
(5) The surface of the plate should be pasted with a protective film, and there should be no delamination;
(6) In the process of shipment, the plate should have sufficient protection and should not be damaged, and the product packaging should be conducive to forklift transportation, lifting and installation on the ship;
(7) Manufacturers are required to provide free on-site installation guidance services.
Aluminum weather-tight exterior wall door soundproofing
(8) Product samples are submitted for approval by shipyards and shipowners, including PVC color cards, baseboards, etc.;
(9) The quality of PVC on the surface should be guaranteed, and there should be no defects such as cavitation, color difference and discoloration;
(10) The side groove at the end of the plate should be made in a unified mold, maintain a good installation flatness, and the plate and the frame should be firm and elastic;
(11) The seller shall design the production design drawings of the wall panels and ceilings according to the cabin layout drawings provided by the buyer, and send them to the buyer for approval and approval after completion.
(12) 3% spare parts should be provided for each component and plate.
(13) The wall panels for installing washbasins, toilets and storm handrails should be partially strengthened, and the form of reinforcement should be approved;
(14) Each board should be labeled, indicating the board specification, color card number, and room number;
(15) The plates are packaged and shipped according to the deck layer;
(16) The type and parameters of the high sound insulation board should be confirmed by the shipyard;
(17) The sound insulation value of the wall panel and ceiling shall provide the test report of the authoritative institution, and the sound insulation value of the aluminum weather-tight peripheral wall door shall not be lower than the requirements of the relevant flag country specifications;
(18) The type of elastic connecting member of the ceiling should be confirmed by the shipyard.
