The loader is an earth-rock construction machine widely used in road, railway, construction, hydropower, port, mining and other construction projects. It is mainly used for shovel loading bulk materials such as soil, sand, lime, coal, etc. Hard soil, etc., for light shovel. Different auxiliary work devices can be used for loading and unloading of bulldozers, lifting and other materials such as wood. Introduce some tips on driving a forklift:
1. Insert the key into the electric lock hole, release the hand brake, and hand the horn.
2. Issue a driving signal and check the pedal brakes.
3. Start the forklift and enter the work area.
4. The lifting and lowering of the bucket is not the same as the control method of tilting various models. Therefore, the driver must be highly minded at work to prevent the occurrence of a safety accident. The driver must pull out the key and tighten the handbrake when leaving.
You must also do the daily maintenance of the forklift. For example, always check the brake pad for proper clearance, bet the butter, tighten the screws, and the internal combustion engine forklift should always check the oil level of the oil, check whether the hydraulic system is intact, and do a good job. Daily cleaning work. In addition, the forklift driver also needs to learn the causes of common faults and how to eliminate them, to understand the time and maintenance items of the forklift maintenance, so that the equipment is in a better working condition.
A forklift generally has two forward gears, one reverse gear and one parking gear.
The forklift also has several operating handlebars, one for the bucket lift and one for the bucket flip.
The forklift also has several operating handlebars, one for the bucket lift and one for the bucket flip. Start loading the soil with the first gear, the bucket flats the ground, and slowly advances forward. When the soil enters the bucket, use the operating lever to turn the bucket mouth up, so that the soil is installed in the bucket, and then used. The lifting lever raises the bucket, and the gear is placed in the reverse gear to exit, and then the front gear is slowly opened to the front of the car, the car trunk should be horizontally placed, and the forklift bucket should be in the middle of the car directly above, and then used. Turn the hand lever to turn the bucket mouth to the bottom, then use the reverse gear to reverse the car and the car has a safe distance to lower the bucket and turn the flat floor.
I hope this article on the tips of forklift driving can help everyone.
