Português
Deutsch
Français
русский 
Italiano
日本語
عربي 
EspañolCar Seat Refurbishment Tutorial:
1. The first step is to cut the skin: a cowhide is about 40 to 50 square feet. The leather and leather surface of the cow's back are the best parts of a leather, which is generally used for the back and cushion part of the seat, because these two parts of the seat are pressed and rubbed for a long time, and they are also the parts we are most susceptible to. The skin surface of tripe and neck is poor, generally used for the skirt of the seat or the part that is not easy to see, the leather and cloth have a certain stretching direction, and some leather chairs appear uneven after sitting for one or two months, most of which are caused by improper cutting direction;
2, the second step is sewing: after the leather is cut, it enters the sewing process, here is also a little exquisite, generally under the leather 12 to 15 mm thick sponge with a mesh bottom is also called super cotton, pay attention to some stores here to cut corners. When sewing, whether the worker is skilled is very important, the leather once the stitch can not be changed, otherwise it will leave obvious pinholes in the leather, when inspecting, pay attention to whether the open thread needle spacing is uniform, whether the leather head is exposed, whether there are burrs and threads, whether the color of the thread and the leather is consistent, etc.;
3. The third step is to set the seat: simply put, the sewn leather holster is set on the seat. It's easy to say, but it's not so easy to do. In the set, the slightest mistake will tear or scratch the holster, after the sleeve should be slapped and pulled to attach the holster to the seat, the staples fixing the holster should be selected rust-proof, and the size and elasticity of the nail distribution should be consistent. When assembling the seat, the seams of the cushion and cushion should be symmetrical and neat;
4, the fourth step is to reload the seat: the door, the space inside the car is limited, the size of the seat is not small, and relatively heavy, reloading to avoid scratching the seat surface, but also can not touch the paint, so must be in accordance with the requirements of the reloading process, otherwise, a little careless, will be lost.
