Bonwell tells you how to install the car seat cover front back:
1, first remove the headrest (usually hold the headrest movable plug);
2. Set the backrest cover (see left and right and front and back); if the left and right sides are different, see if the backrest side pocket is in the middle. If it is on the side of the door, it means that it is reversed.
3. Plug the front of the back cover from the joint with the seat to the opposite side of the backrest, and fix the adhesive tape at the bottom of the back of the back cover with a little bit of force. Closer will be more docile and look good.
4, then put the headgear and insert it into the backrest;
5, the set of backrest is leveled, the front backrest is completed in the car seat
