How To Properly Install A Child Car Seat?

First, put down the child safety seat. The position where you put it down will probably let you see the back of the seat, then pull out the seat belt and stretch it as much as possible. Pass the seat belt from the outside to the back of the child safety seat. Here, you should pay attention to control the seat belt to avoid jamming, otherwise you will have to come back.

Connect the seat belt and the interface, and it is not over yet, and there is a need to fix it.

At a critical point, after the seat belt passes through the child safety seat, it is necessary to fix the child safety seat's specified clip to the seat belt.

After specifying the seat belt by the specified clip, we rock the child seat left and right by hand to reduce the virtual position between the clip and the seat belt.

Anti-installation is still the old method. First, pull out the safety belt as much as possible, and let the seat belt return to any position by any means, such as pressing the knee on the car seat.

To make it easier to distinguish, call the two blue fixed clips one and two respectively. We completed the first step by fixing the seat belt from the middle of the first to second fixed clips.

Pull the seat belt buckle down and then pass the seat belt under the front of the seat. Do not doubt, it has always been a seat belt.

Finally, attach the seat belt, don't underestimate this step. If the seat belt is not completely pulled out, it will be reinstalled at this step, because the seat belt is stuck and there is no way to lengthen it again.