Supply Of Marine Seats

Material Introduction：

1. The guide rail and positioning base are made of high-strength aluminum alloy, and the inner surface is inlaid and the outer oblique side is decorated with stainless steel.

2. The moving base, lifting column and pedal lifting adjustment are made of steel products, aluminum alloy products and stainless steel products;

3, the seat lifting tilt, front and rear movement, backrest angle adjustment are all made of steel structure;

4. The seat backrest and seat cushion are made of steel frame inner core and PU cold foam disposable molding sponge, which is outsourced leather or fabric;

5. The pedals are made of steel core and environmentally friendly rubber products.

Functional data：

1. The upper part of the seat can be moved forward and backward by 150mm, the height is adjusted by 60mm, and the inclination angle of the seat surface is ±12 degrees;

2, the seat back can be adjusted angle 80 degrees -135 degrees, the headrest up and down adjustment 70mm, handrail multi-point positioning adjustment;

3, seat pressure, hydraulic lifting adjustment range 0-150mm, electric lifting range 0-300mm;

4, the seat can be rotated 360 degrees, multi-point positioning control;

5, the seat can be moved on the guide rail of 0-3000mm, the width of the guide rail is 500cm, the depth is 28mm, the transmission part is wheeled unobstructed double sliding, multi-point positioning control; (the length of the guide rail can be customized according to requirements, the positioning control mode can be Select line control or pedal type);

6, the seat pedal can be used for 90 degree return, the upper and lower position adjustment range is 0-50mm;

7. The seat can withstand the torque above 150FT.LB and reach the AD standard.