Common forklift problems are roughly the following:
(1) What is the larger lifting weight and load center of the forklift? What is the relationship between them?
A: First of all, the load center refers to the horizontal distance from the center of gravity of the standard load to the front wall of the vertical section of the fork. When the overall center of gravity of the cargo is in the same vertical line as the load center, the weight of the larger cargo that the forklift can handle at this time is It is called a large lifting weight. When the overall center of gravity of the cargo is in the load range, the forklift can be loaded and unloaded with a large lifting weight, thereby preventing the accident from being damaged by the impact.
(2) What is the stability of the forklift?
A: Forklift stability refers to the ability of the forklift to exhibit adverse resistance during routine work, which can be divided into longitudinal stability and lateral stability.
(3) How should the forks and gantry be stopped after the industry?
Answer: After the forklift operation, the fork should be lowered to the ground, and the gantry should be in the middle and vertical. This is to enable the forklift hydraulic system to obtain unloading protection, so as to prevent the components in the forklift from being under high pressure for a long time and the deformation is damaged.
(4) Why does the forklift have noise?
A: Most of the noise of forklift trucks is caused by component problems. If there is no lubrication between components, excessive friction will lead to noise, and the degree of fixing of equipment components will also have certain effects. Even if the forklift equipment is not cleaned for a long time, it will cause noise and accumulate over time, which will reduce the overall efficiency and safety performance of the forklift.
