1. Park the forklift on a flat, hard surface and turn off the engine to keep the forklift in an unloaded state.
2. The fork is lowered to the ground, and the wheel is stopped by the parking brake device. If the steering tire is replaced, the jack is supported at the center of the rear bracket of the rear axle. If the driving tire is replaced, the jack is supported at the front side of the frame.
3. Use a jack to slightly lift the forklift to make the tire still in contact with the ground; first unscrew the bolts that fix the inflatable tube, remove the clip, and then loosen the hub nut.
4. Use the jack to lift the car all the way, unscrew the wheel nut and remove the tire.
5. The installation sequence is the reverse of the removal sequence. When installing the hub nut, the tightening torque needs to reach the specified value.
