What Are The Standards For Marine Seats?

Marine Seat Description: Material Introduction 1. The guide rail and the positioning base are made of high-strength aluminum alloy, and the inner surface inlay and the outer beveled edge decoration are made of stainless steel; 2. The mobile base, lifting column and pedal lifting adjustment are made of steel products, aluminum alloy products and stainless steel products; 3. The seat lift and tilt, front and rear movement, and backrest angle adjustment are all made of steel; 4. The seat back and seat cushion are made of steel frame inner core and PU cold foaming one-time molding sponge, covered with leather or fabric; 5. The pedal is made of steel inner core and environmentally friendly rubber products. Functional data 1. The upper part of the seat can be moved back and forth by 150mm, the height can be adjusted by 60mm, and the inclination angle of the seat surface can be ±12 degrees; 2. The seat back can be adjusted from 80 degrees to 135 degrees, the headrest can be adjusted up and down by 70mm, and the armrests can be adjusted by multi-point positioning; 3. The seat air pressure and hydraulic lift adjustment range is 0-150mm, and the electric lift range is 0-300mm; 4. The seat can be rotated 360 degrees, multi-point positioning control; 5. The seat can move 0-3000mm on the guide rail, the width of the guide rail is 500cm, the depth is 28mm, the transmission part is wheeled unimpeded double sliding, and multi-point positioning control; (the length of the guide rail can be customized according to requirements, and the positioning control method can be adjusted. Choose wire-controlled or foot-operated); 6. The seat pedal can be used for 90-degree return, and the upper and lower position adjustment range is 0-50mm; 7. The seat can withstand the torque of more than 150FT.LB, reaching the AD level standard.