1. The child safety seat must be installed in the rear seat of the car, and the seat installation should be strictly in accordance with the requirements, and it cannot be installed on the front seat of the car with airbag;
2. Do not make any changes to the design of the child safety seat or car seat belt so that an otherwise unsuitable child safety seat can be installed in your car. If there is an installation problem, you need to communicate with the dealer or manufacturer. Coordinate installation or replace other models;
3. If you frequently disassemble the child safety seat, you should carefully check whether it is properly placed after each installation. Even if it is installed in a car for a long time, regular inspections are required to ensure a firm installation;
4, the life of the child safety seat is generally about 5 years, the use of plastic for a long time will appear aging, so even if the product is not damaged, the safety seat used for more than 5 years should be replaced in time to avoid potential safety hazards. In addition, as children age, some long-cycle child safety seats also need to change the seat belt fixing method to ensure ride comfort;
5. Before starting, take some time to check if your child is strapped reliably and comfortably. Make sure that the belt used to tighten the child is adjusted to the most appropriate length so that only two fingers can be inserted between the child's chest and the belt.
